Sony UP-DF500 Calibrating the Printing Density, To calibrate the unit, To make a simple calibration

The unit enters the sharpness adjustment mode.

3 Select the desired level by pressing the G or g button.

Current sharpness

The sharpness can be adjusted among 15 levels between 1 and 14 including OFF.

As the * mark is moved towards the right, the

Adjustment		outline is emphasized.
		OFF: The * mark is placed at most left position.
		(Default level)
		Pressing the g button: Increases the sharpness
		level, and the outline is emphasized.
		Pressing the G button: Decreases the sharpness
		level, and the outline is blurred.
	4 Press the MENU button.
		The adjusted level is executed.
		The unit returns to standby status and READY is
		displayed on the LCD.
		The unit operates according to the adjusted level
		until these values are modified.
	Calibrating the Printing Density
	The unit automatically calibrates the printing density
	according to the density curve set.
	1, 4		3

2

1 Press the MENU button.

2 Display the CALIBRATION menu by pressing the

For f button, then press the g button. The calibration menu is displayed.

The unit enters the automatic calibration mode.

3 Select the desired calibration type by pressing the F or f button.

To calibrate the unit

1Display FULL RANGE CAL by pressing the F or f button.

2Press the EXEC button.

The unit starts printing and during printing, the density is automatically calibrated.

The calibration performed at this printing becomes effective for the next printing.

Printout of results of density calibration

To make a simple calibration

The unit can perform a simple calibration each time it makes a printout. When this simple calibration is selected, the test pattern is printed on the printout. The calibration performed at this printing becomes effective for the next printing.

16 Menu Operation