Restart the personal computer.
Start the personal computer to be used for setup. Open the TCP/IP setting page.

Setup

Setup

Setting up the Personal Computer to be Used for Setup

1

2

3 Enter the IP address of the computer and the sub- net mask.

IP address of the computer: NNN.NNN.NNN.nnn NNN.NNN.NNN.NNN: IP address assigned to the UP-DF500 on the network

nnn:Arbitrary numbers (from 1 to 254, should not be the same as those of the fourth NNN of the UP-DF500 IP address.)

Sub-net Mask:255.255.255.0

4

5 Connect the UP-DF500 and the personal computer to be used for setup using the network cross cable.

About the Setup Window

The UP-DF500 can be set up on the setup window displayed on the Web browser of the personal computer to be used for setup.

The setup window has the following pages:

•Summary/Print Job page

Displays the summary and print job status of the UP- DF500.

•DICOM Settings page

Sets up the IP address, DICOM AE title, and so on.

•Printer Status page

Displays the status of the UP-DF500.

•E-Mail Settings page

Sets up the items related to E-Mail.

Opening the Setup Window

1 Start the personal computer to be used for setup, and then start the Web browser software.

2 Enter the following address. http://NNN.NNN.NNN.NNN

This is the IP address assigned to the UP-DF500 on the network.

Page selection area

3 Click the desired page in the page selection area. The desired page opens.

34 Setting up the Personal Computer to be Used for Setup / About the Setup Window