Preparation

Supplied Accessories

The unit is packed together with the following accessories. Check that nothing is missing from your package.

Preparation

Film tray (1)

 

Casters for vertical placement of the unit (2)

AC power cord (1) a)

Cleaning kit (1)

Stopper sheet (1)

Ferrite cores (2)

Warranty card (1) (for the customers in the U.S.A. and

Canada only)

CD-ROM (Instructions for Use disk) (1)

Floppy disk (1)

Operation Guide (1)

a)Footnote for the customers in the U.S.A and Canada When you use the printer in the U.S.A. or Canada, use the AC power cord supplied. When you use the printer in a country other than the U.S.A. or Canada, use the proper AC power cord for your local power system.

Notes

•Retain the original carton and packing materials in case you have to transport the unit in the future.

•Keep the supplied floppy disk, since it is required when repairing.

Assembly

Insert the film tray into the unit.

Holding both sides of the film tray and tray cover with both hands, insert the film tray all the way into the unit.

Placing the Unit

You can place the unit horizontally or vertically.

When placing the unit horizontally

To maintain performance, adequate space is needed for ventilation. Also, to remove jammed film, space of about 11 cm (4 3/8 inches) towards the back and about 26 cm (10 1/4 inches) over the top of the unit are required.

26 cm

(10 1/4 inches) 21 cm

(8 5/8 inches)

11 cm

(4 3/8 inches)

8 Supplied Accessories