Miscellaneous
Error messages | Possible causes and remedies |
REMOVE FILM TOP | The film has jammed around the front |
& INNER:J6 | or inside the unit. |
| tOpen the top cover, then the inner |
| cover and remove the jammed |
| film.(page 28) |
|
|
REMOVE FILM | The film has jammed near the film |
TRAY:J7 | tray. |
| tPull out the film tray and remove |
| the jammed film.(page 29) |
|
|
REMOVE FILM | The film has jammed at several points. |
SOME PLACES:J8 | tOpen all of the covers and remove |
| the jammed film.(page 29) |
|
|
CALIBRATION | The unit takes certain measurements to |
INVALID | estimate a value for automatic |
| calibration. However, the correct value |
| could not actually be measured. The |
| unit can print, but the automatic |
| calibration value is not updated. |
| tTry calibration again. If white strips |
| or scratches appear on the printout, |
| clean the thermal head and |
| rollers.(page 16) |
|
|
MECHA TROUBLE | Mechanical trouble has occurred in the |
S nn | sensor system of the unit. |
| tTurn off the power once and then |
| turn it on. The unit may operate |
| correctly. However, if the message |
| still remains on the LCD, turn off |
| the power immediately and contact |
| your Sony dealer. |
|
|
MECHA TROUBLE | Mechanical trouble has occurred in the |
M nn | motor system of the unit. |
| tTurn off the power once and then |
| turn it on. The unit may operate |
| correctly. However, if the message |
| still remains on the LCD, turn off |
| the power immediately and contact |
| your Sony dealer. |
|
|
MECHA TROUBLE | Mechanical trouble has occurred in the |
U nn | unit system of the unit. |
| tTurn off the power once and then |
| turn it on. The unit may operate |
| correctly. However, if the message |
| still remains on the LCD, turn off |
| the power immediately and contact |
| your Sony dealer. |
|
|
DICOM TROUBLE | Trouble has occurred in the DICOM |
| part of the unit. |
| tTurn off the power immediately and |
| contact your Sony dealer. |
|
|
TAG INVALID | Trouble has occurred in the IC tag part. |
| tTurn off the power immediately and |
| contact your Sony dealer. |
|
|
Other Messages
When the following message appears, the ALARM indicator does not light. The PRINT indicator blinks.
Messages | Possible causes and remedies |
HEAD IN COOLING | The thermal head has overheated. |
PLEASE WAIT | tLeave the unit until the head has |
| cools down and this message |
| disappears. |
|
|
HEAD IN HEATING | The thermal head is warming up. |
PLEASE WAIT | tLeave the unit until the head has |
| warms up and this message |
| disappears. |
|
|
PLEASE WAIT | The unit is retruning to the intial |
| settings to restart printing after closing |
| the covers which opened for removing |
| jammed film or cleaning. |
| tLeave the unit until this message |
| disapperas. When this message |
| appears, the PRINT indicator does |
| not blink. |
|
|
26 Messages