Medical Specifications
Protection against electric shock: Class I
Protection against harmful ingress of water: Ordinary
Degree of safety in the presence of flammable anesthetics or oxygen: Not suitable for use in the presence of flammable anesthetics or oxygen
Mode of operation: Continuous
Design and specifications are subject to change without notice.
SOP and Meta SOP Classes
SOP Class Name | SOP Class UID |
Verification SOP | 1.2.840.10008.1.1 |
|
|
Basic Grayscale Print Management | 1.2.840.10008.5.1.1.9 |
Meta SOP Class |
|
|
|
Basic Film Session SOP Class | 1.2.840.10008.5.1.1.1 |
|
|
Basic Film Box SOP Class | 1.2.840.10008.5.1.1.2 |
|
|
Basic Grayscale Image Box SOP | 1.2.840.10008.5.1.1.4 |
Class |
|
|
|
Print SOP Class | 1.2.840.10008.5.1.1.16 |
|
|
Basic Annotation Box SOP Class | 1.2.840.10008.5.1.1.15 |
|
|
Messages
There are two kinds of messages: error messages and warning messages. This section lists these messages together with their possible causes and remedies. Note the messages and act accordingly.
Besides error and warning messages, other messages stating the operating status of the unit are also displayed. Those messages are not described here.
Error Messages
If a problem occurs, the ALARM indicator lights and an error message stating the problem appears on the LCD window. Note the message and perform whatever action is necessary to solve the problem.
In the error messages introduced in the following table, “nn” indicates the number of the symbol displayed in the actual message.
Error messages | Possible causes and remedies |
SET FILM | The film sheets have run out. |
| tLoad the film into the film |
| tray.(page 11) |
|
|
SET TRAY | The film tray is not installed. |
| tInstall the film tray (page 8). |
|
|
REMOVE PRINTS | The maximum number of printouts has |
| accumulated on the film tray. |
| tRemove the printouts. Printing |
| starts again.(page 14) |
|
|
CLOSE COVER | One of the front, top, or rear cover is |
| open. |
| tClose the opened cover. |
|
|
REMOVE FILM | The film has jammed near the film |
TRAY:J0 | tray. |
| tPull out the film tray and remove |
| the jammed film.(page 27) |
|
|
REMOVE FILM | The film has jammed around the rear |
REAR:J1 | of the unit. |
| tOpen the rear cover and remove the |
| jammed film.(page 28) |
|
|
REMOVE FILM | The film has jammed between the rear |
REAR & TOP:J2 | and top of the unit. |
| tOpen the rear and top covers and |
| remove the jammed film.(page 28) |
|
|
REMOVE FILM | The film has jammed around the top of |
TOP:J3 | the unit. |
| tOpen the top cover and remove the |
| jammed film.(page 28) |
|
|
REMOVE FILM TOP | The film has jammed between the top |
& FRONT:J4 | and front of the unit. |
| tOpen the top and front covers and |
| remove the jammed film.(page 28) |
|
|
REMOVE FILM | The film has jammed around the front |
FRONT:J5 | of the unit. |
| tOpen the front cover and remove |
| the jammed film.(page 28) |
|
|
Miscellaneous
Messages 25