Turn the UP-DF500 on. Press the MENU button.

IP Address

When you use the unit for the first time immediately after you purchase the unit, it is necessary to set up the DICOM part placed inside the unit, adding an IP address and so on.

Before starting the setup, confirm the following with the network administrator.

•The IP address the UP-DF500 will use on the network

•Sub-net mask of the network

•Gateway address, if a gateway is included in the network

To confirm the IP address

The IP address assigned to the UP-DF500 can be confirmed.

1

2

3 Display INFORMATION on the LCD by pressing the F or f button, and then push the g button.

4 Display IP ADDRESS on the LCD by pressing the

For f button.

The IP address assigned to the UP-DF500 appears on the LCD.

Preparation

IP Address 33