Adjustment

Menu Operation

You can set the following items using the relevant menu:

•Confirming information (INFORMATION) (page 15)

•Adjusting the print quality (PRINT QUALITY) (page 15)

•Calibration (CALIBRATION) (page 16)

•Adjusting the density (DENSITY ADJ) (page 17)

•Selecting a gamma curve (GAMMA SEL) (page 19)

Notes

•The next printout will be printed with the values most recently set. You cannot adjust the setting during printing. Once you have adjusted and stored the settings, the printer operates according to those settings until their values are modified.

•If you do not press any button for approximately 15 seconds after pressing the MENU button, the printer is automatically reset to standby status.

Confirming Information

You can confirm the IP address and the total number of prints made since you started the unit.

1 3

2

1 Press the MENU button.

2 Display the INFORMATION menu by pressing the

For f button, then press the g button.

3 Select the item you want to confirm by pressing the

For f button.

To display the IP address

Select IP ADDRESS.

IP address

Note

You can change the IP address using the browser on the computer used to manage the unit.

For details, see the Setup Manual.

To confirm the total number of prints made since you started the unit

Select TOTAL PRINTS.

Total number of prints

This item is useful to estimate when regular maintenance such as replacing the cleaning roller, cleaning the thermal head, etc., is necessary.

For details, see “Maintenance” (on page 20).

Adjusting the Print Quality

You can adjust the sharpness of the printout.

1, 4

2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

1 Press the MENU button.

2 Display the PRINT QUALITY menu by pressing the F or f button, then press the g button.

Adjustment

Menu Operation 15