roller, pinch roller, and separation rubbers” (on page 21).

•Do not add film halfway through one bag of film. The reason for this is because the unit counts the remaining film using the IC tag on the printing protection sheet on the bottom.

6 Remove the seal from the film placed in the film tray.

1Remove the sticky part of the seal, pulling the blank part of the seal toward you.

Note

Be sure to check that the hooks of the film tray cover and its magnets are attached firmly on the film tray. If the film tray cover is not closed correctly, film placed in the film tray may slide around.

3Remove the seal from the film completely, by pulling the blank portion out of the film tray.

7 Insert the film tray.

Operation

2Close the film tray cover after you pull the blank portion of the seal out of the film tray.

After a few seconds, the film tray is locked and the following message appears on the LCD.

Notes on storing film

•If you remove the film and plan to keep them for a long time, store unused film in the damp-proof bag.

•Store the unopened package in a cool, dark place.

Check that the hooks of the film tray cover are locked and its magnets are attached firmly on the film tray.

Loading Film 13