Note
When removing the film tray, hold both sides of the film tray and the tray cover with both hands and remove it.
7 Open the tray cover and wipe the separation rubbers with the wet pad.
Separation rubbers
8 Reset the film tray.
The cleaning has been completed.
Notes
•Be sure to perform the cleaning tasks in the order described above.
•Close the cover after the wiped parts have dried completely.
•Do not use the wet pad used for wiping rollers to clean the thermal head.
Ventilation holes are provided on the unit to prevent it from overheating.
Three filters are provided on the front cover for covering the ventilation holes.
To clean the filters, proceed as follows.
1 Pull the lock lever to open the front cover.
2 Lift the filters upward a little and pull it toward you to remove it.
Filters
3 Clean the filters using a vacuum cleaner or the like.
Notes
•Be careful that the filter does not get caught in the vacuum cleaner.
•Do not rub the net of the filter roughly.
Miscellaneous
Precautions 23