4 Reset the filters and close the cover.
After you have finished all cleaning tasksSet the main POWER switch on the rear panel to ON, and then set the ON/STANDBY switch on the front panel to ON.
The following message appears for about several minutes.
Miscellaneous | After the following message is displayed after about |
| |
| several minutes, you can start printing again. |
Specifications
Power requirements
| 100 to 240 V AC, 50/60 Hz |
Input current | 4.4 to 1.8 A |
Operating temperature | |
| 10°C to 30°C (50°F to 86°F) |
Operating humidity | |
| 20% to 80% (no condensation allowed) |
Storage and transport temperature | |
| |
Storage and transport humidity | |
| 20% to 90% (no condensation allowed) |
Dimensions | About 600 × 250 × 686 mm (w/h/d) |
| (23 5/8 × 9 7/8 × 27 1/8 inches) |
Mass | Approx. 55 kg (121 lb 4 oz) |
Printing system | Thermal printing |
Resolution | 12.59 dot/mm (320dpi) |
Gradations | 4,096 levels |
Maximum print size | |
| 401.8 × 335.4 mm |
Picture elements |
|
| 4,224 × 5,060 dots (w/h) |
Printing time | Approx. 70 sheets/hour (excluding the |
time for cooling the head)
Digital interface
Network port × 1
Special output connector × 1
Input connector AC IN (for power) Accessories supplied
Film tray (1) Cleaning Kit (1)
Caster for setting the printer vertically
(2)
Stopper sheet (1) Ferrite cores (2)
AC power cord (1) a) Operation Guide (1)
Floppy disk (1)
Warranty card (1) (for the customers in the U.S.A and Canada)
a) Footnote for the customers in the U.S.A and Canada
When you use the printer in the U.S.A. or Canada, use the AC power cord supplied. When you use the printer in a country other than the U.S.A. or Canada, use the proper AC power cord for your local power system.
Accessories supplied separately
Blue Thermal Film Printing Pack
Cleaning kit
24 Specifications