Sony UP-DF500 Selecting a Gamma Curve, Gamma curve, To reset to the default setting of the high tone range

3Display the selected number by pressing the G or g button.

Display the selected number.

To reset to the default setting of the high tone range

Display 75.

Selecting a Gamma Curve

When the gamma curve is not specified at the modality side, select the gamma curve to be used at the unit.

1 3 4

2

1 Press the MENU button.

2 Display the GAMMA SEL menu by pressing the F or f button, then press the g button.

The unit enters the gamma selecting mode.

3 Select the desired gamma curve by pressing the G or g button.

The gamma curves for SONY 1 to SONY 5 have been pre-set, you cannot change these settings. The gamma curves for USER 6 to USER 10 can be set to the desired value. For advice on the settings, contact your nearest Sony dealer.

Gamma curve	Meaning
SONY 1	Default setting
SONY 2	The half tone is darker compared to
	SONY 1
SONY 3	The half tone is lighter compared to
	SONY 1
SONY 4	The half tone is smoother compared to
	SONY 1
SONY 5	The half tone is sharper compared to
	SONY 1
USER 6 to 10	Not preset. For advice on settings,
	contact your nearest Sony dealer. If
	you select these gamma curves,
	USER 6 to 10 before setting, same
	setting as the one of SONY 1 is
	applied.

Gamma curve

The gamma curves of SONY 1 to SONY 5 are shown below.

Dark

Printout

Light

Light	Dark
	Input data

Adjustment

Menu Operation 19