1 Pull the lever toward you to open the front cover.
2 Wipe the thermal head with the wet pad.
Note
Before wiping the thermal head, touch the metallic part of the unit to remove static electricity from your body.
Miscellaneous
Thermal head
Wipe the surface of the thermal head gently with the wet pad.
3 Wipe the platen roller (black rubber roller) gently.
Platen roller (black rubber roll)
Wipe the platen roller gently with the wet pad while turning it.
4 Wipe the pinch roller (dark blue rubber roller).
Pinch roller (dark blue rubber roller)
Wipe the pinch roller gently with the wet pad while turning it.
Notes
•Be careful not to touch the surface of the thermal head with your hand.
•Do not discard the wet pad. This wet pad is used for the cleaning tasks to be performed on other parts of the unit.
•Since the thermal head is still very hot just after printing is finished, be careful not touch the thermal head. Touching the hot thermal head may cause a burn.
5
6 Remove the film tray.
You can remove the film tray without pushing the EJECT TRAY button when the power is off.
22 Precautions