Sony UP-21MD, UP20 Connecting the Video Monitor

Connecting the Video Monitor

Connect a video monitor to view captured images and to check those to be printed. Connect a suitable video monitor which will be used in actual printing, using the following diagram as a guide.

Before connecting the video equipment, see “Important safeguards/notices for use in the medical environments” on page 2.

When connecting the video monitor only to the RGB OUTPUT connectors (only for the UP- 21MD)

When connecting the video monitor only to the RGB OUTPUT connector without connecting to SYNC connector, set SYNC ON G in the OUTPUT SETUP menu to ON.

to wall outlet

NTSC/PAL selector a)

AC power cord (supplied)

to AC IN

UP-21MD	to VIDEO
	INPUT

Preparation

to RGB SYNC

Connecting cable (with

OUTPUT b)to S VIDEO DIN 4-pin

OUTPUTconnectors)

75-ohm coaxial					75-ohm
cable with BNC					coaxial cable
connectors	to S VIDEO				with BNC
			input		connectors
to RGB input
		connector
connectors				to composite
				video input
				connector

Video monitor

a)Set the NTSC/PAL selector to match your TV system. To switch the TV system, turn the power off once, then change the setting. If you change the setting with the power on, this mode will not be switched.

b)See “When connecting the video monitor only to the RGB OUTPUT connectors (only for the UP-21MD)”.

Connections 11