2Select INS by pressing the F, f, G or g button.
Then press the EXEC button.
A single space is inserted between characters and the cursor is positioned at the space.
3Enter the character to be added.
When it is necessary to change the CAPTION ON/OFF setting, go to step 8. If not, go to step 9.
Example: Add a character between A and
B.
1 Move the cursor to B. (B is highlighted in green.)
2 Highlight INS. (INS blinks in green). Then, press the EXEC button.
Operation
A single space is inserted between A and B and the green cursor is positioned at the space.
Cursor (lit in green)
Note
After the EXEC button is pressed, the monitor screen may go dark for a moment.
8 Set the CAPTION ON/OFF function to ON.
1Select ON by pressing the F, f, G or g button.
Highlight ON by pressing the F, f, G or g button. ON blinks in green.
Select OFF to make printouts without a caption.
2Press the EXEC button.
The display changes from OFF to ON.
The display changes from OFF to ON.
9 After entering the caption, highlight EXIT by pressing the F, f, G or g button, then press the EXEC button.
The entered characters are stored in memory. The LAYOUT SETUP menu appears.
10 Press the MENU button.
Note
If you turn off the printer before performing the operation in step 9, characters entered in steps 4 to 7 are cleared without being stored in memory.
34 Making Printouts With a Caption