Cleaning
Cleaning the cabinet
Clean the cabinet, panel and controls with a soft dry cloth, or a soft cloth lightly moistened with a mild detergent solution.
Notes
•Be sure to turn off the power of the printer before cleaning.
•Do not use any type of solvent, such as alcohol or benzine, which may damage the finish.
Cleaning the thermal head
Clean the thermal head with the thermal head cleaning cartridge (supplied) if the printout quality deteriorates, for example, when the white stripes begin to appear on the printout.
It is recommended that you clean the thermal head after every 10 packs of paper to keep the printout quality at its best.
1
2 Place the cleaning sheet in the paper tray so that the shiny surface faces down.
Notes
•Be sure to use the cleaning sheet supplied with the
•Do not reuse the old cleaning sheet.
3 Load the cleaning cartridge into the ribbon compartment, and then close the front panel. “CLEAN HEAD:PRESS[EXEC]” is displayed. If the ink ribbon is left in the ink ribbon compartment, remove the ink ribbon first, then load the cleaning cartridge. For detailed information on how to load, see “Loading an Ink Ribbon” on page 13.
4 Press the EXEC button.
The thermal head cleaning is started. While the head is being cleaned, “CLEAN HEAD:NOW CLEANING” is displayed.
When cleaning has been completed, “CLEAN HEAD:FINISHED” is displayed.
Both paper and an ink ribbon are necessary for printing. Use the ink ribbon with the paper contained in the same package.
Contains color ink ribbon cartridge and paper. Color ink ribbon: 3 rolls
Paper: 90 × 100 mm (5 3/4 × 8 3/8 inches) size paper, 1 package (80 sheets) × 3
Contains color ink ribbon cartridge and paper. Color ink ribbon: 4 rolls
Paper: 100 × 144 mm (5 3/4 × 8 3/8 inches) size paper, 1 package (50 sheets) × 4
Note
If the paper has been exhausted, replace the ink ribbon together with the paper.
Miscellaneous
Recommended Ink Ribbon and Paper | 57 |
|
|