Sony UP-21MD, UP20 Selecting the Input Signal, 2, 5 2, 4

Set the paper securely under the tab.

Riffle the paper with the protection sheet.

Place the paper along with the protection sheet in the paper tray with the printing surface facing up.

Front

Partition

2 Remove the protection sheet placed on the top of the paper.

3 Close the cover of the paper tray, and then slide the paper tray back into the printer until it clicks into place.

Selecting the Input Signal

Before printing, select the appropriate input signal (the input connector to which the signal to be printed is being input) VIDEO, S VIDEO, or RGB.

2, 5 2, 4, 5

1 2, 3

1 Turn on the video monitor and the printer.

2 Press the MENU button and display the INPUT SETUP menu by pressing the F, f, G or g button.

Switch IN to green by pressing the F, f, G or g button, then the INPUT SETUP menu appears.

Preparation

Note

When you cannot slide the paper tray back into the printer, check whether or not paper or printouts are left around the paper outlet slot. Remove them if there are.

When storing the paper

•Avoid storing the paper in a location subject to:

–high temperatures

–high humidity

–excessive dust

–direct sunlight

•Use the original package for storing unused paper.

3 Select INPUT SEL by pressing the F or f button.

Position the cursor at INPUT SEL by pressing the F or f button.

Before Printing 15