Location and Function of Parts and Controls

For details, refer to the pages given in parentheses.

Front Panel

UP-21MD

UP-20

APRINT indicator (for the UP-21MD)Lights while the printer is printing.

POWER indicator (for the UP-20)

Lights in green while the printer power is on.

BALARM indicator (for the UP-21MD)(61)Lights in orange when the ink ribbon or paper is exhausted, the paper jams, or another problem occurs.

PRINT/ALARM indicator (for the UP-20) (61)

Lights while the printer is printing in green. Lights in orange when the ink ribbon or paper is exhausted, the paper jams, or another problem occurs.

CRemote sensor (12)

Aim the head of the remote control unit toward this sensor.

DPrinter window display (only for the UP-21MD)Displays messages that also appear along the bottom edge of the monitor screen. The printer window display has a narrower display range and shows only a limited number of characters. Also displays the menu screen line at which the cursor is positioned. If an error occurs, a corresponding error message is displayed.

The contrast of the printer window display can be adjusted on the SYSTEM SETUP menu. (“Adjusting the Brightness of the Printer Window Display (Only for the UP-21MD)” on page 53.)

ESTOP button (18)

Press this button to stop continuous printing. The printer stops printing after finishing the printing item currently being printed.

F MULTI PICTURE button (25)

Press this button to select the desired printout type on the regular screen. When you press this button, the currently selected printout type is displayed for a few seconds. Each time you press this button, the type is switched in the following sequence: 1, 2, 4, 1....

The setting of MULTI PIX on the LAYOUT SETUP menu changes linked with the press of this button.

G PRINT QTY (quantity) button (20)

Press this button to set the number of copies on the regular screen. You can set any number up to 9. When you press this button, the currently selected number is displayed for a few seconds. The setting of PRT QTY on the PRINTER SETUP menu changes linked with the press of this button. You can change the number even when the printer is printing.

H MEMORY PAGE button (22, 25, 36) Press to select the memory page.

IMENU button

Press this button to display or clear the menus.

Introduction

Location and Function of Parts and Controls

5