At INPUT (input signal) connectors (10)
Used to connect the video equipment supplying the source image.
Connector | Connectable equipment |
RGB SYNC a) | Video equipment with RGB |
| SYNC output connectors |
|
|
S VIDEO | Video equipment with a Y/C |
| separated output connector |
|
|
VIDEO | Video equipment with a |
| composite video signal output |
| connector |
|
|
a)RGB SYNC connectors are equipped only with the UP- 21MD.
B- AC IN connector (10, 11, 12)
Used to connect the printer to a wall outlet with the supplied power cord.
C
Equipotential ground terminal connector (10, 11, 12)
Used to connect to the equipotential plug to bring the various parts of a system to the same potential. Refer to “Important safeguards/notices for use in the medical environments” on page 2.
DT OUTPUT connectors (11) Used to connect the video monitor.
Refer to “Important safeguards/notices for use in the medical environments” on page 2.
Connector | Connectable equipment |
RGB SYNC b) | Video monitor with RGB SYNC |
| input connectors |
|
|
S VIDEO | Video monitor with a Y/C |
| separated input connector |
|
|
VIDEO | Video monitor with a composite |
| video signal input connector |
|
|
b)RGB SYNC connectors are equipped only with the UP- 21MD.
E
Used to connect a computer to control the printer. For details, contact your nearest Sony dealer.
F
REMOTE 2 connector (stereo mini jack) (12) Used to connect a
GREMOTE 1 connector (special mini jack) (12) Used to connect an
HNTSC/PAL (NTSC/PAL TV) selector (10, 11) Set this selector according to the TV system of the input signal. If you change this setting, turn the printer power off, then back on again.
Selector position | When |
NTSC | NTSC system video equipment is |
| connected. |
|
|
PAL | PAL system video equipment is |
| connected. |
|
|
Monitor Display
When the printer is connected to the video monitor and you first turn on the printer, the following regular screen message appears.
When the MENU button is pressed, the menu screen displayed.
For detailed information on the menu screen, see “Menu Tree” on page 39.
AC (Caption) display section
C is displayed in white when the printer is set to print a caption.
BInk ribbon type and remaining amount of ink ribbon display section
Displays the ink ribbon type and the remaining amount of ribbon (indicates the number of printouts that can still be made with the ribbon) when the ribbon remaining display function is set to ON.
CMessage display section Messages are displayed.
Error messages are displayed on the top line of the screen.
Warning messages are displayed on the center of the screen.
Introduction
Location and Function of Parts and Controls | 7 |
|
|