Sony UP-21MD, UP20 Adjusting the Brightness of the Printer Window Display (Only for the UP-21MD), Selecting Whether the Operation and Error Tones Sound

Function to be	Operation
selected
CAP/S PAGE b)	When the memory image is
(CAPTURE/SOURCE	displayed, the source image
PAGE)	appears when you press the
	switch of the remote control unit.
	When the source image is
	displayed, the image is captured
	in memory when you press the
	switch. The memory page is also
	changed. The captured image is
	not printed.
PRINT & PAGE	Starts to print when you press the
	switch if the image has been
	captured in the memory, and at
	the same time moves to the next
	memory page.
	If the image has not been
	captured in the memory page, the
	printer does not work correctly
	when you press the switch of the
	remote control unit.
SRC & CAP	When you press and hold down
(SOURCE &	the switch of the remote control
CAPTURE)	unit, the source image appears.
	When you release the switch, the
	image showing at the instant you
	release the switch is captured.
	The memory page is not
	changed.
SRC & C PAGE b)	When you press and hold down
(SOURCE &	the switch of the remote control
CAPTURE PAGE)	unit, the source image appears.
	When you release the switch, the
	image showing at the instant you
	release the switch is captured.
	Then, the memory page is
	changed to the next memory
	page. The captured image is not
	printed.

a)When you use the remote control unit with this function, confirm that the source image is displayed on the video monitor. If not, press the SOURCE/MEMORY button so that the source image will be displayed. When multiple reduced images are being captured, after the last image is captured, the printer prints the captured image (or queues printing), then the printer goes to the next memory page.

b)When multiple reduced images are being captured, after the last image is captured, the printer goes to the next memory page.

Adjusting the Brightness of the Printer Window Display (Only for the UP-21MD)

When it is hard to read the contents of the printer window display, adjust the brightness using the menu.

1 Display the SYSTEM SETUP menu from the PRINTER SETUP menu.

2 Select the LCD-CNTR. item, then adjust the brightness of the printer window display.

Note

If you select the left end of the scale, OFF is displayed. In this case, no messages appear in the printer window display when the video monitor returns to the regular screen.

Selecting Whether the Operation and Error Tones Sound

Whenever you press a button on the front panel or sub panel, the operation tone sounds (one time). When an error occurs, the alarm tone sounds (three times). You can turn these tones on and off using the menu.

1 Display the SYSTEM SETUP menu from the PRINTER SETUP menu.

2 Select the BEEP item, then select whether or not the operation and error tones sound by pressing the G or g button.

When you want to	Selection
Sound the tones.	ON
Disable the tones.	OFF

Adjustment

Making Various Settings 53