For example, when the cursor is positioned at N, pressing the g button results in the cursor moving to O at the left end on the next line.
When the cursor is positioned at EXIT:
Only the G and g buttons are effective. If you press the g button, the cursor moves to the top on the first line, that is A. If you press the F or f button, the error tone sounds.
To select either capital letters or small letters
You can change the characters in the character entry area from capital letters to small letters or vice versa.
1Highlight SHIFT in green by pressing the F, f, G or g button on the video monitor.
When characters are displayed in capital letters in the character entry area, SHIFT is displayed in the printer window display (only for the UP- 21MD). When displayed in small letters, shift
is displayed.
2Press the EXEC button.
Capital letters are changed to small letters, or small letters are changed to capital letters in the character entry area.
Note
Characters already entered (displayed in the character display area) are not changed even if letters are changed in the character entry area.
6 Press the EXEC button.
The character selected in step 5 appears at the point where the green cursor is positioned in the character display area, after which the cursor moves to the next position.
The cursor moves to this position.
When you enter the wrong character in the above example
1Select G by pressing the F, f, G or g button, then press the EXEC button.
The cursor moves back by one and the character entered in step 5 is highlighted in green.
2Select DEL by pressing the F, f, G or g button.
Highlight DEL in green by pressing the F,
Lit in green f, G or g button. DEL blinks in green.
3Press the EXEC button.
The character selected in 1 is deleted. When the character to be deleted is located among previously entered characters, the characters after the deleted one shift back by one.
Note
After the EXEC button is pressed, the monitor screen may become dark for a moment.
7 Repeat steps 4, 5 and 6 to enter the remaining characters of the caption.
To enter a space
1Position the green cursor at the point where you want to enter a space.
2Select SP by pressing the F, f, G or g button.
3 Press the EXEC button.
A single space is entered and the green cursor moves to the next position.
If there is a character at the position where the space is entered, that character is deleted and a single space is left.
To replace a previously entered character without changing the number of characters You can replace a previously entered character with a new one.
1Position the green cursor at the character to be
replaced by performing the operations explained in step 4.
2Overwrite the invalid character with the correct character by performing the operations explained in steps 5 and 6.
The previously entered character is replaced with the new one.
To add characters midway
1Position the cursor at the position where a character is to be added by performing the operations explained in step 4.
Operation
Making Printouts With a Caption | 33 |
|
|