SYNC: 1 Vp-p, 75 ohm terminated, sync negative

S VIDEO (Separate luminance (Y) and chrominance (C) signals):

4-pin mini-DIN × 1

Y:1 Vp-p, 75 ohm terminated, sync negative

C:For NTSC/EIA standards: 0.29 Vp-p color burst, 75 ohm terminated For PAL B.G.I. standards:

0.3 Vp-p color burst, 75 ohm terminated

VIDEO (NTSC composite video signal for NTSC/EIA standards and PAL composite video signal for PAL B.G.I. standards) BNC connector ×1

1Vp-p, 75 ohm terminated, sync negative

Controls connectors

REMOTE 1: special mini jack ×1 For RM-5500 Remote Control Unit (not supplied)

REMOTE 2 (automatic printing connector): Stereo mini jack: × 1 For RM-91 Remote Control Unit (See “Assigning Functions to the Remote Control Unit” on page 52.)

RS-232C (Computer control interface):

D-SUB 25-pin connector ×1 Output: 5-kilohm load Typical ± 8 V

Input: 5-kilohm load High level 5 to 15 V Low level –5 to –15 V

Supplied accessories

Color printing pack (1) Paper tray (1)

AC power cord (1)

Warranty card (1) (for the customers in the U.S.A. and Canada only)

CD-ROM (for the customers in the Europe only)

Thermal head cleaning cartridge (1) Instructions For Use (1)

Optional accessories

UPC-21L Color Printing Pack

UPC-21S Color Printing Pack Medical Specifications

Protection against electric shock: Class I

Protection against harmful ingress of water:

Ordinary

Degree of safety in the presence of flammable anesthetics or oxygen: Not suitable for use in the presence of flammable anesthetics or oxygen

Mode of operation: Continuous

Using the automatic printing capabilities (REMOTE 2)

If you send remote control pulse signals as illustrated through the REMOTE 2 connector, the printer can be remotely controlled according to the remote control setting. (See page 52.)

Turn on the power of the printer and display the source image on the monitor screen. Send a remote control pulse signal at the timing shown below.

The timing depends on the setting on item IMMED. CAP of the FUNCTION SETUP menu.

Note

The remote control pulse signal examples introduced here are one example of typical operation timing. The timing may be affected due to the memory page selected and print type.

CAPTURE timing pulse for REMOTE 2:

REMOTE 2 connector pin assignment:

MIN BUSY GND

GND

BUSY

MIN

FL2FL1

CN5

5

2

3

Miscellaneous

Specifications 59