Miscellaneous

Warning Messages

In case of a warning, only warning messages appear. The

ALARM lamp does not light.

Warning message

 

Possible causes and remedies

On the video monitor

On the printer window display

 

 

(only for the UP-21MD)

 

 

 

 

HIT ANY KEY

HIT ANY KEY

This message appears when the remote control unit is used in

 

 

CAP-STOP (CAPTURE STOP) mode and when the printer

 

 

stops capturing images once images have been captured to all

 

 

memory pages (to the last point of the last memory page).

 

 

tPress any button. Printer operation is enabled after this.

 

 

 

INPUT MISMATCH

INPUT MISMATCH

• The TV system of the signal input from the source

 

 

equipment (VTR, video camera and so on) is not

 

 

compatible with the TV system of your printer.

 

 

tCheck the signal of the TV system and input the

 

 

correct one.

 

 

tCheck the setting of the NTSC/PAL selector on the rear

 

 

panel. (See page 10)

 

 

• A signal other than a video signal (such as an audio signal,

 

 

etc.) is input.

 

 

tInput the correct video signal.

 

 

 

NO INPUT

NO INPUT

• The printer is not receiving an input signal from

 

 

equipment corresponding to the input selected on the

 

 

INPUT SETUP menu.

 

 

tCheck the input signal selected on the INPUT SETUP

 

 

menu. (See page 15.)

 

 

tCheck whether the video equipment is outputting a

 

 

video signal in playback mode.

 

 

tCheck that the connections between the signal source

 

 

equipment and the printer are secure. (See page 10.)

 

 

 

NO IMAGE

NO IMAGE

The image is not captured in memory.

 

 

tCapture the image in memory then start printing. (See

 

 

page 17.)

 

 

 

PRINTING MEMORY

PLEASE WAIT

In the selected memory page, the captured image is being

 

NOW PRINTING

printed or queued.

 

 

tRetry the operation once the printer finishes printing.

 

 

 

HEAD IN COOLING

PLEASE WAIT

The thermal head has overheated.

 

HEAD IN COOLING

tLeave the printer until the head cools down and this

 

 

message disappears. The printer starts printing

 

 

automatically.

 

 

 

62 Error/Warning Messages