Miscellaneous

Specifications

Power requirements

100 to 120 V AC only, 50/60 Hz (for 100 to 120 V AC users)

220 to 240 V AC only, 50/60 Hz (for 220 to 240 V AC users)

Power consumption

About 1.8 A max. at 25°C (for 100 to 120 V AC users)

About 1.0 A max. at 25°C (for 220 to 240 V AC users)

Operating temperature

5°C to 35°C (41°F to 95°F) Operating humidity

 

20% to 80% (no condensation allowed)

Storage and transport temperature

 

–20°C to 60°C (–4°F to 140°F)

Storage and transport humidity

 

20% to 90% (no condensation allowed)

Dimensions

About 212 × 125 × 395 mm (w/h/d)

 

(8 3/8 × 5 × 15 5/8 inches)

Mass

About 6.5 kg (14 lb 5 oz)

Printing system

Dye transfer sublimation printing

Printable pixels

When using the UPC-21S and printing

 

the full-image:

 

In NTSC mode: 1524 × 976 dots

 

(when the H WIDTH and V WIDTH

 

are set to 1016 and 488 on the

 

WINDOW SETUP menu)

 

In PAL mode: 1524 × 1176 dots

 

(when the H WIDTH and V WIDTH

 

are set to 1016 and 588 on the

 

WINODW SETUP menu)

 

When using the UPC-21L and printing

 

the full-image:

 

In NTSC mode:2032 × 1452 dots

 

(when the H WIDTH and V WIDTH

 

are set to 1016 and 488 on the

 

WINDOW SETUP menu)

 

In PAL mode: 2032 × 1458 dots

 

(when the H WIDTH and V WIDTH

 

are set to 1016 and 588 on the

 

WINODW SETUP menu)

Total gradation

256 levels each for yellow, magenta,

 

and cyan

Printing time

When using the UPC-21S:

 

When PRN SPEED is set to HIGH

 

on the PRINTER SETUP menu

 

In NTSC mode: Approximately 16

seconds

In PAL mode: Approximately 17 seconds

When PRN SPEED is set to NORMAL on the PRINTER SETUP menu

In NTSC mode: Approximately 24 seconds

In PAL mode: Approximately 27 seconds

When using the UPC-21L:

When PRN SPEED is set to HIGH on the PRINTER SETUP menu In NTSC mode: Approximately 25 seconds

In PAL mode: Approximately 25 seconds

When PRN SPEED is set to NORMAL on the PRINTER SETUP menu

In NTSC mode: Approximately 40 seconds

In PAL mode: Approximately 40 seconds

TV system Selectable with the NTSC/PAL selector

In NTSC mode: NTSC/EIA standards

In PAL mode: PAL B.G.I. standards

Input connectors

RGB SYNC (analog RGB signal) (only for the UP-21MD): BNC connector × 4

RGB: 0.7 Vp-p, 75 ohm terminated

SYNC: 0.3 to 4 Vp-p, 75 ohm terminated, sync negative

SYNC ON G:

Automatic discrimination

S VIDEO (Separate luminance (Y) and chrominance (C) signals):

4-pin mini-DIN × 1

Y:1 Vp-p, 75 ohm terminated, sync negative

C:For NTSC/EIA standards: 0.29 Vp-p color burst, 75 ohm terminated

For PAL B.G.I. standards: 0.3 Vp-p color burst, 75 ohm terminated

VIDEO (NTSC composite video signal for NTSC/EIA standards and PAL composite video signal for PAL B.G.I. standards):

BNC connector × 1

1Vp-p, 75 ohm terminated, sync negative

AC IN (for power input) Output connectors

RGB SYNC (analog RGB signal) (only for the UP-21MD): BNC connectors × 4

RGB: 0.7 Vp-p, 75 ohm terminated

58 Specifications