DBATT (battery) indication Shows the battery condition.

For details, see “Power Supply” on page 38.

ECH (channel) indication

Shows the transmission channel. Each time you press the SET button, the channel indication changes as follows. For details, see “Settings” on page 47.

Transmission channel

Transmission

Press

frequency

the

 

SET

Attenuation

button.

 

level of the

 

input signal

 

Accumulated battery use time

The channel/frequency indications for U66 model are shown.

5+ (+ selection) / – (– selection/ reset) buttons

Press these buttons to set the transmission channel, frequency, or attenuation level of the input signal. The “–” button resets the accumulated battery use time to “00:00”.

6SET button

Press to change display parameters. For details, see “Settings” on page 47.

Plug-on transmitter

(UTX-P1)

Front side

6

Bottom side

1Audio input connector (XLR type)

Connect a microphone or a line output connector of an audio mixer, etc.

31