9OUTPUT (audio output) connector (3.5-mm diameter stereo mini jack)

Connect one end of the supplied XLR- BMP conversion cable or the stereo mini plug-BMP conversion cable here and the other end to the microphone input on a camcorder, mixer, or amplifier. If the microphone input connector on the device connected to the tuner is a stereo mini jack, connect the straight (BMP) plug to the tuner and the L-shaped (stereo mini) plug to the microphone input connector on the device.

Half-rack size diversity

tuner (URX-R1)

Front panel

Rear panel

1POWER switch

Turns the power of the tuner ON or OFF.

2Antennas a/b

The angle of the antennas can be adjusted manually.

3MONITOR connector (phone jack)

To monitor the tuner output, connect the headphones to this connector and adjust the monitor level with the MONITOR control. Use either stereo or monaural headphones.

4MONITOR control

Turn to adjust the output monitoring level (through the headphones).

5+ (+ selection) / – (– selection/ reset) buttons

Press these buttons to set the reception channel and frequency.

6Display section

A B

RF AF

CH

C

ARF (radio frequency) indications The number of dots indicates the RF input level.

35