Parts Identification

4Display section

A B

C

Reception channel group and number

RF

AF

BATT

Reception

Press the

frequency

SET button.

CH

D

ARF (radio frequency) indications The number of dots indicates the RF input level.

BAF (audio frequency) indication Appears whenever the output audio signal is stronger than the reference level.

CBATT (battery) indication Shows the battery condition.

For details, see “Power Supply” on page 38.

DGP (group)/CH (channel) indication

Shows the reception channel group and channel number. Each time you press the SET button, the channel indication changes as follows.

For details, see “Settings” on page 47.

Accumulated battery use time

5+ (+ selection) / – (– selection/ reset) buttons

Press these buttons to set the reception channel and frequency. The “–” button resets the accumulated battery use time to “00:00”. These buttons can also be used to adjust the monitor level.

6Battery compartment Accommodates two LR6 (size AA) alkaline batteries.

For details on how to insert the batteries, see “Power Supply” on page 38.

7SET button

Press to change display parameters. For details, see “Settings” on page 47.

8POWER switch

Turns the power of the tuner ON or OFF.

34