Power Supply

Battery indication

When you turn the power on, the battery condition is shown by the BATT indication in the display section.

When the indication in column 4 starts to flash, replace the batteries with new ones. Be sure to check the expiration date printed on the new batteries before using them.

 

1

2

3

4

BATT indication

Lights

Lights

Lights

Flashes

Battery status

Good

Less than

Less than

Almost

 

 

50% charged

20% charged

drained

Note

The indicated battery condition may not be correct if the batteries were not new when installed. If you plan to use the component for a long period, it is recommended that you replace the batteries with brand new ones.

Notes on batteries

Batteries may leak or explode if mistreated. Be sure to follow these instructions.

•Be sure to install the batteries with the correct polarity.

•Always replace the two batteries together.

•Do not use different types of batteries or old and new one together.

•The batteries are not rechargeable.

•When not using the component for a long period of time, remove the batteries to avoid leakage. If the batteries do leak, clean all leakage from the battery compartment and the component. Leakage left in the compartment and the component may cause poor battery contact. If there seems to be poor battery contact, consult your Sony dealer.

40