Attachment and Installation Procedures

This section describes the procedures for attaching the supplied accessories to components and the installation of the diversity tuner module (URX-M1) into the MB-806A Tuner Base Unit or SRP-X700P Powered Mixer.

Attaching the supplied accessories to the

body-pack transmitter (UTX-B1)

Attaching the microphone

Microphone (supplied)

For a secure connection, be sure to turn and lock the connector cover.

Attaching the holder clip to the microphone

Push the holder clip against the bottom of the microphone until the holder clip clicks into place.

Attaching the wind screen to the microphone

Insert the microphone into the hole at the bottom of the windscreen.

Attaching the belt clip

Insert one end of the belt clip into one of two holes on either side of the transmitter, and then insert the other end into the hole on the other side.

41