Attachment and Installation Procedures

Attaching the shoe mount adapter

Attaching the microphone stand adapter

Be sure to hold the horizontal part of the belt clip with the horizontal groove on the shoe mount adapter.

After attaching the belt clip, insert the shoe mount adapter between the portable diversity tuner (URX-P1) and the belt clip, with the vertical parts of the belt clip aligned with the two vertical parallel grooves on the shoe mount adapter. Then, push the shoe mount adapter in the direction of the arrow, and then catch the horizontal part of the belt clip with the horizontal groove on the shoe mount adapter to hold the belt clip in place.

After attaching the belt clip and the shoe mount adapter, insert the microphone stand adapter into the screw hole at the top of the shoe mount adapter, and then rotate the microphone stand adapter until it is securely attached.

Installing the diversity

tuner module (URX-M1)

Notes

•Before installing the diversity tuner module (URX-M1), make sure the unit into which the diversity tuner module (URX-M1) will be installed is turned off. Do not install or uninstall the diversity tuner module (URX-M1) while the unit is turned on, as this may damage the connector or cause noise.

44