Transmission channel

Transmission

Press

frequency

the

 

SET

Attenuation

button.

 

level of the

 

input signal

 

Accumulated battery use time

The channel/frequency indications for U66 model are shown.

5+ (+ selection) / – (– selection/ reset) buttons

Press these buttons to set the transmission channel, frequency, or attenuation level of the input signal. The “–-” button resets the accumulated battery use time to “00:00”.

6SET button

Press to change display parameters. For details, see “Settings” on page 47.

7POWER switch

Turns the power of the transmitter ON or OFF.

8Battery compartment Accommodates two LR6 (size AA) alkaline batteries.

For details on how to insert the batteries, see “Power Supply” on page 38.

Portable diversity tuner

(URX-P1)

1Antennas a/b

The angle of the antennas can be adjusted manually.

2MONITOR connector (3.5-mm diameter stereo mini jack)

To monitor the tuner output, connect the headphones to this connector.

3RF (radio frequency) indicator The color indicates the strength of the RF input signal.

On in green: RF input is 15 dBµ* or more.

Off: RF input is less than 15 dBµ*.

......................................................................................................................................................................

* 0 dBµ = 1 µVEMF

33