Parts Identification

BAF (audio frequency) indication Appears whenever the output audio signal is stronger than the reference level.

CGP (group)/CH (channel) indication

Shows the reception channel group and channel number. Each time you press the SET button, the channel indication changes as follows.

For details, see “Settings” on page 47.

Reception

 

channel

Press

group and

the

number

SET

 

Reception

button.

frequency

 

7RF (radio frequency) indicator The color indicates the strength of the RF input signal.

On in green: RF input is 25 dBµ* or more.

Off: RF input is less than 25 dBµ*.

8SET button

Press to change display parameters. For details, see “Settings” on page 47.

9TUNER OUTPUT (audio output) connector (XLR type) Connect to the audio input connector of a mixer or amplifier, etc.

0LEVEL (audio output level) switch

Sets the output level of the TUNER OUTPUT connector to –28 dBm or –58 dBm.

Select the setting according to the input level of the equipment connected to the tuner.

qa TRS PHONE (tuner audio output) connector (1/4-inch jack) Connect to the audio input connector of a mixer or amplifier, etc. The output level from this connector is –30 dBm.

qs DC IN 9V (DC power input) connector

Connect the supplied AC adapter here.

Diversity tuner module

(URX-M1)

1SET button

Press to change display parameters. For details, see “Settings” on page 47.

......................................................................................................................................................................

* 0 dBµ = 1 µVEMF

36