Sony Ericsson P800 Sounds and alerts, To set the telephony preferences

This is the Internet version of the user’s guide. © Print only for private use.

•Program digit sequences into a Contact card for the service. Each digit sequence to be sent as tones must begin with a p.

Once your call to the service has been established and you want to send one of

your preprogrammed digit sequences, choose

Show contact on the

Phone menu to get to the Contact card with the tone sequences.

Contacts Edit Unfiled

Bank

+4613244500 p1#1234567890

p10#0#34#56789 (w)

p30#1234#56 (w)

p10#1#567890123 (w) p20#123456789 (w)

Preferences

In this menu you can change the settings for the telephony options. (Settings on your P800 that are system-wide and affect more than one application are made from the Control panel, see “Control panel” on page 137).

To set the telephony preferences

1.Select Phone > Edit > Preferences.

2.Select the item to set up.

Sounds and alerts

Use these settings to control how your P800 should alert you of an incoming call. You can choose to use any sound recording or audio file. For more information see “Ring signals” on page 135.

You may personalize the ring melodies further for individual contacts, see “To change the details of a contact” on page 98.

Note It is not advisable to program any personal codes into your P800, in case your phone is stolen or lost.

•Ring volume – Set the preferred sound level for handheld, handsfree and car use.

•Increasing ring – Select the checkbox to use increasing ring signals. This disables the other volume settings.

•Ring (voice) – Select a ring signal for incoming voice calls. Tap the trumpet to listen to the signal. Tap again to stop playback.

52 Phone