This is the Internet version of the user’s guide. © Print only for private use.

Charging the battery

When the battery needs to be charged, a beep is heard. The indicator light (on the top of your P800) blinks red and a battery low message appears on the screen.

The battery can be charged whenever you want. The P800 performance is not affected. However, using your P800 while charging increases the charging time.

To charge the battery

The P800 can be charged either when it is switched on or off.

1.Make sure the battery is inserted in your P800 and the lid is closed.

2.Connect the charger to the P800 at the base of

the phone by the flash symbol. The charger plug flash symbol must face upwards.

3.Connect the charger to the electrical outlet.

Charging is indicated by the battery meter on the screen pulsing continuously, and the indicator at the top of the P800 showing a steady red light (or green, if the P800 is switched on).

See also “Battery Information” on page 175.

TipYou can also use other battery chargers that have been supplied with other Sony Ericsson mobile phones using the same connector plug, for example, T68i or T300.

Note When the battery is completely discharged, or new, it may take up to 30 minutes before the battery charging icon appears on the screen.

4.Wait approximately 4 hours or until the battery meter on the screen is full and the indicator on the top of the P800 shows a steady green light.

5.Remove the charger by tilting the plug upwards.

Care instructions

Your P800 is a highly sophisticated electronic device. To get the most out of it, please make sure that you follow this advice:

Keep the P800 in its protective bag when not using it.

Use a commercial glass screen cleaner sprayed on a cloth, when you clean the screen.

Use only stylus provided to tap on the screen.

Getting to know your P800

13