This is the Internet version of the user’s guide. © Print only for private use.

Note Backup and restore does not work via infrared or Bluetooth wireless technology.

Performing a backupTo make a backup

1.Turn on your P800 and connect it to the PC via cable.

2.In the PC, click on on the PC taskbar and select Back up

and restore.

3.Select your P800 in the menu that appears. Several P800 can be backed up to the same PC.

4.Select Backup and choose what to back up: P800 and/or Memory Stick.

5.Click Yes and follow the instructions in the PC and in the P800.

6.The backup is complete.

2. In the PC, click on on the PC taskbar and select Back up

and restore.

3.Select your P800 in the menu that appears. Several P800 can be backed up to the same PC.

4.Select one of the backups in the list of previously saved backups and click Restore.

5.Click Yes and follow the instructions in the PC and in the P800.

6.The restore is complete.

Note Everything in your P800 will be overwritten by the chosen backup. Once you have clicked Yes to start the restore, you cannot cancel the procedure.

Note If you have used your Secure Tokens (Secure Access files) since you made your backup, you must reconfigure these. If you restore another P800, you must reconfigure your Secure Tokens. For more information see “Secure tokens” on page 157.

Restoring data

Lost data or accidentally deleted information in your P800 can you restore from an earlier backup. A backup from the phone can only be restored to the phone, and a back up from a Memory Stick only to a Memory Stick.

To restore a backup

1. Turn on your P800 and connect it to the PC via cable.

Synchronization and backup

133