Sony Ericsson P800 Note, Enable PIN, Disable PIN, To change the PIN code:

This is the Internet version of the user’s guide. © Print only for private use.

Use the settings on the Primary, Alternative and Flip Closed tabs to set methods for entering text in your P800.

Primary The method that you select here is activated automatically when you need to enter text into your P800.

Alternative The method that you select here is activated if you

tap at the bottom of the screen.

If you load other text input software, select it and adjust its settings here.

User greeting

Your P800 can show a user greeting on the standby screen when you turn it on. Use this dialog to turn this function on or off. You can define your own user greeting text (up to 32 characters).

WIM PIN settings

WIM (WAP Identity Module) is used for performing security functions, especially to store and process information needed for user identification and authentication. It is a tamper-resistant store for private keys, certificates and other items that may require a PIN for access or modification.

The WIM management dialog consists of PIN choice list and a WIM items list.

You can select a PIN from the PIN choice list. The WIM items list changes content dynamically, displaying only the keys that are protected by the selected PIN and also have an associated certificate. Other keys that are protected by the selected PIN but do not have an associated certificate are not shown in the WIM item list. This is the case when WIM PIN (PIN-G) is selected.

Note The PIN-G applies to the whole WIM and any items that do not have a different PIN, that is, no specific items on the WIM are linked to PIN-G.

You can change status of a PIN:

•Enable PIN A PIN code that is enabled is requested for authorization of an operation. To proceed with the operation you must enter the PIN code.

•Disable PIN A PIN code that is disabled is not requested to authorize an operation to proceed.

To change the PIN code:

1.Select the PIN you want to change from the choice list.

2.Select Change PIN.

If a PIN code has been blocked, you must unblock it before it can be used again. Select the PIN and select Change PIN.

142 Control panel