Sony Ericsson P800 Insertion and removal, To insert the battery, To remove the battery

This is the Internet version of the user’s guide. © Print only for private use.

SIM card

When you register as a subscriber with a network operator, you receive a SIM (Subscriber Identity Module) card. The SIM card contains a computer chip that keeps track of your phone number, the services included in your subscription, and your phone book information, among other things.

A PIN (Personal Identity Number) code is supplied with the SIM card from your operator and must be entered when switching on your P800.

Insert the SIM card as shown in the picture.

For more information. see “Managing the SIM phone book” on page 98.

Battery

Before you use your P800 for the first time, charge the battery provided for at least 4 hours. Use the supplied charger. See “Charging the battery” on page 13.

Insertion and removalTo insert the battery

1.Ensure that the flip is closed.

2.Place the battery in the

battery compartment and close the lid.

1

To remove the battery

1. Ensure that your P800 is turned off.

Note It is important that you
always turn off your P800	2

before removing the battery. Failure to do so can result in loss of information.

2.Remove the battery lid by pulling down the release catch below the CommuniCam.

3.Use your fingernail at the lower left-hand edge of the battery to gently lift the lower edge of the battery outwards.

4.Take out the battery.

12 Getting to know your P800