This is the Internet version of the user’s guide. © Print only for private use.

Handling e-mails

Sending e-mail

 

Writing e-mailsTo send an e-mail message

• Select Send > Send immediately.

 

To write a new e-mail

• Select an e-mail account and select Message > New.

If you leave the message before sending it, it will automatically be stored in the Draft folder (unless you edit a message which already was located in Outbox).

To mark an e-mail as urgent

• On the address tab, select High in the Priority list.

TipIf you are creating several e-mails, and not using GPRS, you can reduce connection time by saving them to Outbox and then connect and send them all at the same time.

To enter addresses from Contacts when writing an e-mail

1.Select To:

2.In the Select contact dialogue select the check box for each entry you want to send the e-mail to.

3.Select Done.

TipTo enter several addresses manually (without using Contacts) in a text message, multimedia message or in an e- mail: enter a comma between each address.

Note If your P800 is connected to the Internet when you send an e-mail, it will be sent immediately and your P800 will remain connected to the Internet.If not, your P800 will connect to the Internet and then send the e-mail.

To save an e-mail message and send it later

Select Send > Save to Outbox.

To move an e-mail message from Outbox to Draft

In your list of Outbox messages, tap to the left of the e-mail (a tick appears), and select Message > Move to draft.

If you leave the message before sending it, it will automatically be stored in the Draft folder (unless it was created from Outbox).

Adding attachmentsTo attach an entry to an e-mail message

1.On the attachment tab, select Add.

2.Select the type of attachment you want to add.

3.Select the item.

Messages

89