This is the Internet version of the user’s guide. © Print only for private use.

2. Push the release catch against the rounded edge below the

Click

arrow. A distinct click will let you know that the key pad is now attached correctly

3.Let the key pad stay fully opened. Place the cover plate in position (see “To attach the flip replacement” on page 21).

Activating the virtual flip

You must activate the virtual flip, when you have removed the flip keypad, to be able to open and close the virtual flip.

To activate the virtual flip

Select Control Panel > Device > Flip removed.

1.Tap the Enable virtual flip checkbox.

2.Tap Done.

To de-activate the virtual flip

Cancel the selection Control Panel > Device > Flip removed.

1.Clear the Enable virtual flip checkbox.

2.Tap Done.

Virtual flip

When the flip is open, is shown on the status bar when the virtual flip is enabled. Select to “close” the virtual flip.

When the virtual flip is “closed”, the virtual flip keypad is shown. Select to open the virtual flip. You can then continue working in another application with the flip open.

 

ABC

DEF

 

 

GHI

JKL

MNO

 

 

PQRS

TUV

WXYZ

 

 

a/A

 

 

22

Getting to know your P800