Sony Ericsson P800 To attach the keypad, To attach the flip replacement, To remove the flip replacement

This is the Internet version of the user’s guide. © Print only for private use.

To attach the flip replacement

1.The flip replacement has two hooks at the bottom edge. These hooks will fit into the two recesses at the, now opened, bottom of the P800. Align the flip replacement until it is almost in place, then gently push it upwards towards the screen. A distinct click will let you now that it is in correct place.

To remove the flip replacement

1.Put your nail or the end of the stylus in the hollow right below one of the catches and prise the edge of the cover plate upwards. A distinct click will let you know that the catch has released. Continue with the second catch.

To attach the keypad

1.To attach the key pad you have first have to remove the flip replacement (if mounted). Place the key pad so that its release catch is facing the arrow on the now opened bottom of the P800. The key pad will be in a more or less horizontal angle at this time..

Note At the end of the flip key pad there is a hinge, which is adjustable in three positions. Make sure the hinge is in its middle position when you attach it.

Getting to know your P800 21