Sony Ericsson P800 To remove the keypad, To restore the factory settings, Removing and attaching the flip keypad

This is the Internet version of the user’s guide. © Print only for private use.

To restore the factory settings

1.Select Applications > Control panel > Device > Display.

2.Tap Calibrate and the calibrate screen appears.

3.Press the Jog Dial - the text “Factory settings restored” is

shown.

Flip removed

You can use your P800 without the physical flip. Remove the flip keypad and activate the virtual flip, which gives you the same functionality as when using the keypad on the real flip. Enter numbers and characters using your stylus.

Removing and attaching the flip keypadTo remove the keypad

1.To remove the key pad you first have to remove the cover plate beneath it. Use your fingernails or the back end of the stylus to gently prize the cover plate off its catches (See figure). Put your nail or the end of the stylus in the hollow right below one of the catches and prize the edge of the cover plate upwards. A distinct click will let you know that the catch has released. Continue with the second catch.

Note Be careful with the touch-sensitive screen. Never use a sharp object like a screwdriver

.

2

1

PRIZE HERE

2.Fold the keypad out and lift away the loose cover plate from under the keypad.

3.Use your nails or the back end of the stylus to gently pull the release catch in the same direction as the arrow. The key pad is now loose and may be lifted off.

20 Getting to know your P800