SB1024/SB1025/SB1026

O P E R A T I O N

For Machines Mfg. Since 8/09

Graduated Index Rings

The table ball handles and elevation crank have graduated index rings attached (see Figure

18) that are used to accurately determine table movement in increments, as listed in the table below:

Axis

Individual

One Full

 

Increment

Revolution

X

0.001"

0.200"

Y

0.001"

0.200"

:

0.001"

0.100"

Index Rings

Figure 18. Graduated table index rings.

Always keep the table locked in place unless table movement is required for your operation. Unexpected table and workpiece movement could cause the cutter to bind with the workpiece, which could result in personal injury or damage to the cutter and workpiece.

Table Locks

Refer to Figure 19 for the locations of the locks used to secure the table in place.

X-Axis Locks

Z-Axis

Y-Axis

Locks

Lock

 

Figure 19. Locations of table locks.

-30-

Page 31 Page 33
Page 32
Image 32
Southbend SB1024, SB1026, SB1025 owner manual Graduated Index Rings, Table Locks
Page 31 Page 33
Top Page Image Contents