SpectraLink 8002 Wireless Telephone Overview

Quick Start Guide

1.A wireless LAN must be properly configured and operational through the use of 802.11 wireless APs. Ensure WMM is enabled on the APs.

2.Configure a TFTP server on the LAN. The TFTP server is used to load the handset software and SIP configuration files into the handsets. See Chapter 2 SpectraLink 8002 Wireless Telephone Configuration for DHCP information.

3.The supported SIP system components must be connected to your network and completely operational.

4.Visit http://www.polycom.com/usa.en/support/voice/wi- fi/spectralink_8002_wireless.html to download the latest handset software and example SIP configuration files.

5.Ensure the handset software is properly loaded on the TFTP server that has been designated for the handset code. See Chapter 3 Software License and Protocol Management, section Configuration Process.

6.Create/modify configuration files on the SIP TFTP server to define parameters for the SIP application. See Chapter 4 Programming the SIP Handset Features, section SIP TFTP Server Configuration Files. The TFTP server may be the same one referenced in step 2 above.

7.Configure your handset per Chapter 2 SpectraLink 8002 Wireless Telephone Configuration. Ensure these configuration options are set:

Regulatory Domain

SIP Registration, Reg 1 and Login

IP Addresses: DHCP or static for each listed component, including SIP TFTP server and TFTP server.

Security

Preferred Channels

PN: 1725-36034-001_B.doc

13

VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299

Page 13
Image 13
SpectraLink 8002 manual Quick Start Guide, Security Preferred Channels