SpectraLink 8002 manual Regulatory Domain, Transmit Power

SpectraLink 8002 Wireless Telephones Configuration and Administration (SIP)

WPA2-PSKThe security features of WPA2 (Wi-Fi Protected Access) using PSK are available and may be used if supported by the APs in the facility. Select either Passphrase and enter a passphrase between eight and 63 characters in length or Pre-shared Key and enter the 256- bit key code.

Regulatory Domain

The Regulatory Domain will default to None on the handset display. FCC requirements dictate that the menu for changing the domain be available by password, which in this case is the LINE key. To change the domain, press LINE and then enter the digits that represent the site’s domain. Note that both digits must be entered.

01North America

02Europe (except Spain and France); Japan (channels 1-13)

04Spain

05France

06Korea

As of this writing, Spain and France are adopting the general European regulatory rules. Check with your wireless LAN administrator or supplier regarding which domain to enter in these countries.

Transmit Power

Available Transmit Power is regulated by domain. The Regulatory Domain setting above affects the options available for this setting. The default setting is Maximum which in North America is 100 mW. The Maximum in other domains is 30 mW. Transmit Power may be set to a lower number if necessary by selecting one of the other levels. If changed from the default, ensure the Transmit Power setting is the same on all handsets and all APs.

Power is limited to 30mW in regulatory domains other than North

America.

See Appendix A for the full list of certified countries and the corresponding domain for each.

32 PN: 1725-36034-001_B.doc

VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299