Diagnostic Tools
i | : | b | b | b | b | b | b | s | n | c | h |
| b | c n |
e | e | e | e e | e e e e e e | D G H I |
| ||||||||
r | r | r | r | r | r | r | r r | r | r r | r + x | x | x x | ||
m m m G : g g g g P : p | p | p | p | |||||||||||
A | n | y |
|
|
|
|
|
|
|
|
| S | m | r y |
Where:
•i = index of selected AP (value will be from 0 to 3 )
•bbbbbb = the last three octets of the BSSID for a discovered AP
•sn = signal strength in
•ch = channel
•bcn = beacon interval
•eeeeeeeeeee = SSID (up to first 11 characters)
•DGHI = 802.11 standards supported
•rrrrrrrr = rates supported. Basic rates will have a “b” following the rate
•+ = more rates are supported than those displayed
•xxxx = WMM or UPSD if those QoS methods are supported
•mmm = security mode
•G:gggg = group key security
•P:pppp = pairwise key security
•Any/MyID = softkey to toggle between “single SSID” and “any SSID” modes
•Detl/Smry = softkey to toggle between the multiple AP display (summary), and the single AP display (detail)
Numbers scrolling across the handset display indicate AP information is being obtained. A Waiting message indicates the system is not configured properly and the handset cannot find any APs.
PN: | 75 |
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
