Using the SIP Handset

 

 

 

 

 

 

 

 

 

 

 

 

 

If you want to…

 

 

Then…

 

 

 

 

 

 

 

 

 

 

 

 

Listen to voicemail

 

 

When any proxy has outstanding messages, the voicemail icon will display.

 

 

 

 

The LINE menu will display a plus (+) indication when there is a new

 

 

 

 

voicemail for that line. Indications are cleared when the handset receives

 

 

 

 

notification that all new voicemail messages have been read.

 

 

 

 

37 Press START and dial the number assigned to message retrieval and

 

 

 

 

press START again.

 

 

 

 

38 Follow system instructions to retrieve messages.

 

 

 

 

Alternately, if a PROXYn_MAIL_ACCESS value has been configured for the

 

 

 

 

corresponding proxy, the voicemail system can also be accessed by

 

 

 

 

pressing the Msg softkey, which will appear after selecting a line and before

 

 

 

 

beginning to dial.

 

 

 

 

 

 

Do Not Disturb

 

 

Press FCN 2. The handset will not ring for new incoming calls.

 

(reject all incoming calls)

 

When the do-not-disturb feature is enabled, the standby screen will display

 

 

 

 

Do Not Disturb.

 

 

 

 

 

 

Clear Do Not Disturb

 

 

Press FCN 2 again to resume ringing for new incoming calls.

 

 

 

 

 

Redial the last number

 

39 Press START.

 

you dialed

 

 

40 Press Redl.

 

 

 

 

 

 

 

 

41 Verify that the displayed number is the one you want and the line # is

 

 

 

 

valid.

 

 

 

 

42 Press START.

 

 

 

 

 

Activate a registered OAI

 

43 Press START.

 

function on an

OAI

 

44 Press FCN.

 

server

 

 

 

 

 

45 Navigate to desired OAI function using Up and Down buttons.

 

 

 

 

 

 

 

 

46 Select the OAI function using the Select button or shortcut key.

 

 

 

 

 

 

Silence while ringing

 

 

Press the END key to silence the ring.

 

 

 

 

 

 

Adjust

the

 

While the headset is plugged in, press the up/down volume buttons on the

 

headset volume

 

 

side of the handset during the call.

 

 

 

 

 

 

End the call

 

 

Press the END key to return to the standby mode.

 

 

 

 

 

 

Turn on the backlight

 

 

The backlight comes on when any key is pressed or when there is an

 

 

 

 

incoming call, and stays on for 10 seconds. It turns off if another key is not

 

 

 

 

pressed for 10 seconds.

 

 

 

 

 

 

PN: 1725-36034-001_B.doc

69

VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299

Page 69
Image 69
SpectraLink 8002 manual Oai