SpectraLink 8002 Wireless Telephone Configuration
Security
*NONE disables any 802.11 encryption or security authentication mechanisms.
For WEP,
The encryption key or encryption passphrase displays as it is entered. For security reasons codes will not display again once entered, even if the entry screen is revisited.
WEP (Wired Equivalent Privacy) is a wireless encryption protocol that encrypts data frames on the wireless medium allowing for greater security in the wireless network. If WEP is required at this site, you must configure each handset to correspond with the encryption protocol set up in the APs. Select the entries from the options below to enable the handset to acquire the system.
Authentication Select either Open System or Shared Key.
WEP On/Off Select either WEP Off or WEP On.
Key Information
Default Key Enter the key number specified for use by the handsets. This will be 1 through 4.
Key Length Select either
Key 1 through 4 Scroll to the key option that corresponds to the Default Key that was entered above. Enter the encryption key as a sequence of hexadecimal characters. (Use the 2 and 3 keys to access hexadecimal digits
Rotation Secret This is used for proprietary WEP key rotation. Refer to your custom document if this feature is supported in your system.
PN: | 31 |
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299