5.Select Sprint PCS Connection Card and click Next on the “Select your card”screen.
6.Click Next to install the software to the default destination folder (recommended). If you need to install the software to a different folder, click Choose and select an alternate installation destination.
7.Click Finish or Restart to complete the installation and launch the Sprint PCS Connection Manager.
8.Wait for your PC to reboot.
Windows 2000: You may need to restart your PC manually by selecting Start>Shutdown>Restart.
9.Click OK when you are prompted to insert the Sprint PCS Connection Card. Insert the card into the Type II PC Card slot.
Note: Do not forcefully insert the Sprint PCS Connection Card. This may damage the connector pins.
10.Windows will detect the new hardware (Sprint PCS Connection Card) and will install the necessary drivers. The Add New HardwareWizard or Found New Hardware Wizard will launch, depending on your operating system.
11.Follow the onscreen prompts to allow the wizard to install the drivers.
12.Click OK when you are notified that the installation is complete.
On completion of this step, the Sprint PCS Connection Manager Software and the Sprint PCS Connection Card driver are installed and you can proceed to activate your card (if it has not already been activated).
Installing Your Card
Section 1C: Installing the Sprint PCS Connection Card | 17 |
