
Setting UpYour Phone
1.Install the battery (if necessary).
■Slide the battery release latch and then slide the battery cover and remove it from the back of the phone.
■Insert the battery into the opening, making sure the connectors align. Gently press down to secure the battery.
■Replace the battery cover and slide it until you hear a click. Then, slide the battery release latch.
(See “Installing the Battery”on page 23 for the illustration.)
2.Press and hold to turn the phone on.
■Your phone will turn on, search for Sprint service, and enter standby mode.
■If your phone is not yet activated, or if it is locked, see “Getting Started With Sprint Service”on the following page for more information.
3.Make your first call.
■Use your keypad to enter a phone number.
■Press .
Note: Your phone’sbattery should have enough charge to turn on, find a signal, set up your voicemail, and make a call.You should fully charge your battery as soon as possible. See “Charging the Battery”on page 24 for details.
SettingUpService
Section 1A: Setting Up Service | 3 |