Preparation
2The TAD prompts you to press 
REPEAT/SCAN or SKIP/ SCAN 
to select announcement A, B, or AO. The selected an- nouncement name appears (A, b, or AO).
3 Press CHANGE then ANNC.
ANNC
CHANGE 
4Speak your message from about 8 inches in front of the TAD.
5When you finish, press STOP. The TAD beeps and plays back the announcement.
Checking the Announcement
To hear the
If you hear “No announcement” when you press ANNC, that means the TAD is set to announce only, but there is no
If you hear “Hello. Please leave a message after the tone” that means the TAD is set to announcement A or B but you have not recorded an announcement.
Changing Your Recorded Announcement
To change your recorded announcement, record a new announce- ment over the existing one.
18
