Sprint Nextel SP-809 owner manual Setting the DAY and Time

43-5809.fm Page 15 Wednesday, August 18, 1999 1:43 PM

Preparation

If the dial tone stops, you have touch-tone service. Since the phone is preset to touch-tone service, you do not need to make any change to the dialing mode.

If the dial tone continues, you have pulse service. Press PHONE PROG/MEM # # # 3.

If your phone is set for pulse service and you want to change the dialing mode to touch-tone service, press PHONE PROG/MEM #

# # 8.

SETTING THE DAY AND TIME

Note: You can use the handset as well as the keys on the base to operate the TAD. To use the handset, simply press ANS SYS to ac- cess the TAD before beginning each procedure. The ANS SYS in- dicator lights and the TAD announces the number of messages then beeps twice.

Follow these steps to set the day and time so the TAD can record the correct information when each message and memo is re- ceived.

Note: If you do not complete each step within 20 seconds, the TAD sounds two beeps and exits setup. Start again at Step 1.

1Press CHANGE then

CLOCK. A number from 1–7	CLOCK
(the day of the week, with 1
being Sunday) appears in the
message counter window and	CHANGE
the TAD announces the cur-
rently set day.

Note: The TAD’s message counter window might also alternately show other information to tell you the status of the TAD.

15